Huawei PDU8000 - Branch Parameter Settings; Threshold Settings

7.4.3.4 Branch Parameter Settings
On the Settings screen, tap Branch Param. to access the screen.
Tap Set Branch 1 Alias or Set Branch 2 Alias to set circuit breaker alias.
Tap Set Rated Current to set circuit breaker parameters.
Figure 7-34 Branch Param.
● Rated Current (A)
Species the rated current of each branch. The value is 10, 16, 25, 32, 40, 50, and
63.
7.4.3.5 Threshold Settings
On the Settings screen, tap Threshold to access the screen.
PDU8000 Modular Precision PDC V2.0
User Manual 7 MDU Commissioning Guide
Issue 04 (2021-04-13) Copyright © Huawei Technologies Co., Ltd. 92