Huawei PDU8000 - Replacing a Hot-Swap MCB

(1) mounting holes
Step 7 Reinstall the panel on the PDC.
----End
8.4.4 Replacing a Hot-Swap MCB
Prerequisites
● Tools: MCB extracting kit, Phillips screwdriver, key to the PDC door
● Materials: new MCB
NO TE
Obtain the MCB extracting kit from the le box on the PDC front door.
Procedure
Step 1 Open the cabinet front door, and switch the MCBs to be installed to OFF.
Step 2 Remove the front panel of the output module.
Figure 8-11 Removing the front panel
Step 3 Push open the handles on both sides of the MCB.
PDU8000 Modular Precision PDC V2.0
User Manual 8 Maintenance Guide
Issue 04 (2021-04-13) Copyright © Huawei Technologies Co., Ltd. 127