Huawei PDU8000 - 5.3 Installing the PDC

Category Tools and Materials
Protective shoes Firestop putty -
NO TE
● This table may not list some tools required at specic sites. Site installation personnel
and technical support personnel should prepare tools based on site requirements.
● Prepare restop putty for sealing cable holes after cable connection. Huawei does not
provide the restop putty. The customer needs to purchase it.
5.2.3 Checking Personnel Requirements
Construction personnel must have basic knowledge of safe operation, be trained
to master correct operation methods, and have the appropriate job
qualications.
The owner should pay attention to the following items when organizing the
construction personnel to carry out construction work:
● Construction personnel have been trained and
qualied by Huawei to master
methods for system installation and commissioning, and have obtained work
permits before they begin to install and commission equipment.
● The number of construction personnel depends on the project progress and
the installation environment.
● Construction personnel have read through the safety precautions and related
product documents before they begin work.
5.3 Installing the PDC
Prerequisites
● The installation environment has been checked with expected results.
● The site has been closed
o, and notices have been posted.
● The PDC has been unpacked and inspected, and no problems were found.
● You have obtained the tools and meters required for the installation.
● Installation personnel must be
qualied and certied. Power distribution
equipment operators must hold a primary electrician
certicate or higher.
Context
● A modular precision PDC can be installed on a concrete oor or an ESD oor.
● A modular precision PDC can be deployed separately or combined with
another cabinet.
PDU8000 Modular Precision PDC V2.0
User Manual 5 Installation Guide
Issue 04 (2021-04-13) Copyright © Huawei Technologies Co., Ltd. 37