Figure 5-3 Marking-o template (PDC dimensions: 2200 mm x 600 mm x 1100
mm/2000 mm x 600 mm x 1100 mm)
Figure 5-4 Marking-o template (PDC dimensions: 2000 mm x 600 mm x 1200
mm)
Step 2 Drill holes in the marked positions using a hammer drill.
Step 3 Slightly tighten expansion bolts to prevent the expansion sleeves from uttering.
Step 4 Knock the expansion bolts vertically into mounting holes until the at washers are
ush with the oor.
Step 5 Remove the bolt, at washer, and spring washer.
PDU8000 Modular Precision PDC V2.0
User Manual 5 Installation Guide
Issue 04 (2021-04-13) Copyright © Huawei Technologies Co., Ltd. 40
To Next Page
Loading...
