● Wrench a leveling foot clockwise to elevate a cabinet foot, or wrench a leveling foot
anticlockwise to lower it. The cabinet feet can be adjusted within a range of 0-8 mm.
● To prevent cabinet tilting, adjust all the feet at the four corners instead of one foot.
● Do not remove leveling feet, because this work brings you only a great deal of
reworking.
Step 8 Level the PDC using a level and an adjustable wrench.
Figure 5-7 Leveling the PDC
(1) Level
Step 9 Partially tighten the expansion bolt.
Step 10 (Optional) Combine cabinets. Remove the cabinet connecting plates from the
rack, and then secure the connecting plates in the connection positions on the
door using screws.
PDU8000 Modular Precision PDC V2.0
User Manual 5 Installation Guide
Issue 04 (2021-04-13) Copyright © Huawei Technologies Co., Ltd. 42
To Next Page
Loading...
