Huawei PDU8000 - Page 58

Figure 5-21 Preparing an OT terminal
(1)
Cable
(2) Heat shrink
tubing
(3) OT
terminal
(4) Electric hydraulic
pliers
(5) Heat
gun
Figure 5-22 Preparing a cord end terminal
(1) Cable
(2) Cord end terminal (3) Crimping tool
There are two types of RJ45 connectors, including 568A and 568B, as shown in
Figure 5-23 and Figure 5-24. Using 568A as an example: The RJ45 connector can
be connected in the 4-wire or 2-wire methods, as shown in Figure 5-25 and
Figure 5-26.
PDU8000 Modular Precision PDC V2.0
User Manual 5 Installation Guide
Issue 04 (2021-04-13) Copyright © Huawei Technologies Co., Ltd. 51