● If this is not the initial startup and these parameters have been set before, the
system uses the existing settings by default.
The user name is admin (preset password: 000001).
Figure 6-3 Setting Wizard
The gures are for reference only. The actual parameter values prevail.
Step 6 After the quick settings are complete, if the monitoring page displays alarms, clear
the alarms.
For system security purposes, change the preset password upon rst login.
Step 7 Turn on the input switches on the front panel of the PDC.
Step 8 Switch on the output circuit breakers except reserved circuit breakers in the PDC in
sequence to power on the corresponding devices and check whether the
monitoring parameters on the MDU screen are correct.
Step 9 (Optional) Power
o the PDC.
1. Turn o the output switches in the PDC.
2. Turn
o the input switches in the PDC.
3. Switch o the upstream power circuit breaker of the PDC.
----End
PDU8000 Modular Precision PDC V2.0
User Manual 6 Commissioning Guide
Issue 04 (2021-04-13) Copyright © Huawei Technologies Co., Ltd. 71
To Next Page
Loading...
