3. Remove the front end of the holding rail. See (4) in Figure 3-33.
4. Push the plate into the holding rail. See (5) in Figure 3-33.
5. Remove the rear end of the holding rail.
Lift the positioning pin and remove the holding rail from the square holes. See (6) and
(7) in Figure 3-33.
Step 6 Remove the other guide rail on the opposite side in the same way.
----End
RH2288 V3 Server
User Guide
3 Installing and Removing the Server
Issue 32 (2019-03-28) Copyright © Huawei Technologies Co., Ltd. 96
To Next Page
Loading...
