4. Place the removed server onto an ESD platform.
Step 5 Remove the front end of the holding rail.
1. Hold down the plate on the front end of the holding rail and pull out the hook. See (1)
and (2) in Figure 3-33.
Figure 3-33 Removing a holding rail
2. Push the holding rail out of the square holes. See (3) in Figure 3-33.
RH2288 V3 Server
User Guide
3 Installing and Removing the Server
Issue 32 (2019-03-28) Copyright © Huawei Technologies Co., Ltd. 95
To Next Page
Loading...
