Procedure
l Check indicator status.
Observe the RH2288 V3 indicator status, and check that hardware devices are properly
operating.
For details, see 2.4 Indicators and Buttons.
l Check the RH2288 V3 using the iBMC WebUI.
a. Log in to the iBMC WebUI. For details, see 9.2 Logging In to the iBMC WebUI.
NOTE
You are advised to change the default password when you log in to iBMC for the first time.
For details, see 5.6 Changing an iBMC User Password.
b. View the RH2288 V3 version information.
Choose System > Firmware Upgrade, and view server versions, as shown in
Figure 5-3.
Check that the RH2288 V3 versions meet site requirements.
Figure 5-3 Querying version information
c. View the RH2288 V3 health status and alarms.
Choose Information > Information Summary, and view server health status, as
shown in Figure 5-4.
RH2288 V3 Server
User Guide
5 Configuring the RH2288 V3
Issue 32 (2019-03-28) Copyright © Huawei Technologies Co., Ltd. 105
To Next Page
Loading...
