Figure 5-19 iBMC Configuration
h. Select IP Address in IPV4 Configuration and press Enter. On the configuration
screen, set the IPv4 address of the iBMC management network port, as shown in
Figure 5-20.
Figure 5-20 Setting the IPv4 address of the iBMC management network port
i. Set the parameter in IPV4 Configuration and IPV6 Configuration for the iBMC
management network port in the same way.
j. Press F10 to save settings and exit.
RH2288 V3 Server
User Guide
5 Configuring the RH2288 V3
Issue 32 (2019-03-28) Copyright © Huawei Technologies Co., Ltd. 120
To Next Page
Loading...
