l Wear clean protective gloves, ESD clothing, a protective hat, and protective shoes, as
shown in Figure 1-2.
Figure 1-2 Protective clothing
Figure 1-3 shows how to wear an ESD wrist strap.
1. Put on the ESD wrist strap.
2. Fasten the buckle and ensure that the ESD wrist strap is in good contact with your skin.
3. Insert the ground terminal of the ESD wrist strap into the jack on the grounded cabinet or
chassis.
Figure 1-3 Wearing an ESD wrist strap
l Exercise caution when using tools to prevent injuries.
l If the position for installing the device is higher than your shoulders, use a stacker to lift
the device to prevent it from falling on top of you.
l High-voltage power supply provides power for device operation. Do not touch high-
voltage cables directly or through conductive materials. This may cause danger of
electrocution.
RH2288 V3 Server
User Guide
1 Safety Instructions
Issue 32 (2019-03-28) Copyright © Huawei Technologies Co., Ltd. 2
To Next Page
Loading...
