Figure 7-45 Removing the DVD drive from a server with eight 2.5-inch hard disks
Step 11 Hold down the plastic latch on the DVD drive, and push the DVD drive outwards to remove it
from the chassis. See steps (2) and (3) in Figure 7-45.
Step 12 Place the removed DVD drive in an ESD bag.
----End
With Eight 3.5-inch Hard Disks
Step 1 Wear an ESD wrist strap. For details, see 1 Safety Instructions.
Step 2 Determine the cabinet number and chassis number of the server to be removed, and label its
panel to prevent misoperations.
Step 3 Power off the RH2288 V3. For details, see 4.2 Powering Off the Server.
Step 4 Remove all external cables such as power and network cables.
Step 5 Remove the RH2288 V3 and put it on an ESD desktop. For details, see 3.6 Removing the
Server.
Step 6 Remove the chassis cover. For details, see 7.11 Removing the Chassis Cover.
Step 7 Remove full-height full-length riser cards if they are installed. For details, see 7.19 Removing
the Riser Card.
RH2288 V3 Server
User Guide
7 Replacing Parts
Issue 32 (2019-03-28) Copyright © Huawei Technologies Co., Ltd. 169
To Next Page
Loading...
