Procedure
Step 1 Wear an ESD wrist strap. For details, see 1 Safety Instructions.
Step 2 Remove the system battery to be replaced. For details, see 7.27 Removing the System
Battery.
Step 3 Take the spare system battery out of its ESD bag.
Step 4 Hold the system battery with the side marked with text facing upwards, insert the left end of
the system battery into the slot, and gently press down the system battery until it is properly
installed in the slot. See Figure 7-57.
Figure 7-57 Installing the system battery
Step 5 Install the chassis cover. For details, see 7.12 Installing the Chassis Cover.
Step 6 Install the RH2288 V3. For details, see 3.4 Installing the Server.
Step 7 Connect all external cables such as power and network cables. For details, see 3.5
Connecting External Cables.
Step 8 Power on the RH2288 V3. For details, see 4.1 Powering On the Server.
----End
RH2288 V3 Server
User Guide
7 Replacing Parts
Issue 32 (2019-03-28) Copyright © Huawei Technologies Co., Ltd. 179
To Next Page
Loading...
