Step 2 Determine the cabinet number and chassis number of the server, and label its panel to prevent
misoperations.
Step 3 Power off the RH2288 V3. For details, see 4.2 Powering Off the Server.
Step 4 Remove all external cables such as power and network cables.
Step 5 Remove the RH2288 V3 and put it on an ESD desktop. For details, see 3.6 Removing the
Server.
Step 6 Remove the chassis cover. For details, see 7.11 Removing the Chassis Cover.
Step 7 Remove the riser card above the RAID controller card. For details, see 7.19 Removing the
Riser Card.
Step 8 Locate the supercapacitor, which is in one of the four positions shown in Figure 7-62.
Figure 7-62 Supercapacitor positions
Step 9 Loosen the screws on the trans flash module (TFM). See step (1) in Figure 7-63.
RH2288 V3 Server
User Guide
7 Replacing Parts
Issue 32 (2019-03-28) Copyright © Huawei Technologies Co., Ltd. 185
To Next Page
Loading...
