Step 11 Lift the heat sink out of the server. See step (2) in Figure 7-71.
Step 12 Remove the CPU.
Do not use any tool or sharp object to lift the securing rod on the CPU socket. Otherwise, the
server may be damaged.
l Removing a v3 series CPU
a. Raise the securing rod near the or label. See step (1) in Figure 7-72.
Figure 7-72 Removing a v3 series CPU
b. Raise the securing rod near the or label. See step (2) in Figure 7-72.
c. Lift the load plate to a fully open position, and remove the CPU from the socket.
See steps (3) and (4) in Figure 7-72.
d. Place the removed CPU in an ESD bag.
Ensure that CPU sockets are populated with CPUs or CPU protective covers during
transportation and storage.
l Removing a v4 series CPU
a. Raise the securing rod near the
or label. See step (1) in Figure 7-73.
RH2288 V3 Server
User Guide
7 Replacing Parts
Issue 32 (2019-03-28) Copyright © Huawei Technologies Co., Ltd. 196
To Next Page
Loading...
