Step 9 Install PSUs. For details, see 7.10 Installing a PSU.
Step 10 Install the flexible NIC. For details, see 7.44 Installing the Flexible NIC.
Step 11 Install the RAID controller card. For details, see 7.30 Installing the Screw-in RAID
Controller Card.
Step 12 Install the CPUs. For details, see 7.38 Installing a CPU.
Step 13 Install the DIMMs. For details, see 7.40 Installing a DIMM.
Step 14 Connect all internal cables. For details, see 2.7 Internal Cabling.
Step 15 Install the fan module brackets in the chassis. See Figure 7-98.
Figure 7-98 Installing fan module brackets
Step 16 Install the fan modules. For details, see 7.16 Installing a Fan Module.
Step 17 Install the air duct. For details, see 7.14 Installing the Air Duct.
Step 18 Install the riser cards. For details, see 7.20 Installing a Riser Card.
Step 19 Install the supercapacitor if it is required. For details, see 7.35 Installing the Supercapacitor
(Screw-in RAID Controller Card).
Step 20 Install the chassis cover. For details, see 7.12 Installing the Chassis Cover.
Step 21 Install the RH2288 V3. For details, see 3.4 Installing the Server.
Step 22 Connect all external cables such as power and network cables. For details, see 3.5
Connecting External Cables.
Step 23 Power on the RH2288 V3. For details, see 4.1 Powering On the Server.
Step 24 (Optional) Burn the original equipment serial number (ESN) into the new mainboard.
RH2288 V3 Server
User Guide
7 Replacing Parts
Issue 32 (2019-03-28) Copyright © Huawei Technologies Co., Ltd. 216
To Next Page
Loading...
