NOTE
If no CA certificate is installed, click Import CA to import a CA certificate (*.cer, *.crt, or *.pem).
After the CA certificate is imported, the security risk dialog box will no longer be displayed.
Step 6 Click Yes to open the remote console.
The Remote Virtual Console of the server is displayed, as shown in Figure 9-8.
Figure 9-8 Remote Virtual Console
----End
Logging In to the Server Using the IRC (Ubuntu)
Step 1 Download the IRC package for windows kvm_client_ubuntu.zip to the local PC and
decompress it.
The IRC package is available at Independent Remote Console.
Step 2 Connect the local PC to the iBMC management network port of the server, and configure an
IP address for the client to enable communication between the client and the iBMC.
The IP address configured for the PC and the iBMC management network port IP address
must be in the same network segment.
Step 3 Open the console and specify the folder in which the IRC is stored as the working folder.
Step 4 Run the chmod 777 KVM.sh command to set the permission for the IRC.
Run ./KVM.sh to start the IRC.
A dialog box similar to the one shown in Figure 9-9 is displayed.
RH2288 V3 Server
User Guide
9 Common Operations
Issue 32 (2019-03-28) Copyright © Huawei Technologies Co., Ltd. 275
To Next Page
Loading...
