Step 6 Select FusionServer Tools-Toolkit-Vxxx.iso, and click Connect shown in Figure 9-25.
Step 7 Click on the toolbar.
The menu shown in Figure 9-26 is displayed.
Figure 9-26 Power control
Step 8 Select the option based on the actual server status to restart the server.
After the server restarts, the screen shown in Figure 9-27 is displayed.
Figure 9-27 Toolkit startup screen
Step 9 Select Toolkit and press Enter.
Step 10 When information shown in Figure 9-28 is displayed, type C and press Enter.
RH2288 V3 Server
User Guide
9 Common Operations
Issue 32 (2019-03-28) Copyright © Huawei Technologies Co., Ltd. 290
To Next Page
Loading...
