Huawei RH2288 V3 - Page 32

Silkscreen Meaning State Description
Network port
link status
indicators
The indicators show the status of each Ethernet
port on the flexible NIC.
l Off: The port is not in use or faulty.
l Steady green: The port is properly connected.
NOTE
If the flexible NIC provides two network ports, they
correspond to network port indicators 1 and 2 on the
front panel.
Table 2-5 describes the NVMe PCIe SSD indicators on the RH2288 V3 front panel.
Table 2-6 NVMe PCIe SSD indicators
Green Indicator
Yellow
Indicator
State Description
Off Off The NVMe PCIe SSD cannot be detected.
Steady green Off The NVMe PCIe SSD is detected and working
properly.
Blinking green at
2 Hz
Off Data access to the NVMe PCIe SSD is in
progress.
Off Blinking yellow
at 2 Hz
The NVMe PCIe SSD is in the hot swap process.
Off Blinking yellow
at 0.5 Hz
The NVMe PCIe SSD completes the hot removal
process and is removable.
Steady green or
off
Steady yellow The NVMe PCIe SSD is faulty.
Rear Panel
Table 2-7 describes the indicators on the RH2288 V3 rear panel.
Table 2-7 Indicators on the rear panel
Indicator
State
Management
network port
Data
transmission
status indicator
l Off: No data is being transmitted.
l Blinking yellow: Data is being transmitted.
Connection
status indicator
l Off: The network port is not connected.
l Steady green: The network port is properly
connected.
RH2288 V3 Server
User Guide
2 Overview
Issue 32 (2019-03-28) Copyright © Huawei Technologies Co., Ltd. 20