Table 2-9 describes the RH2288 V3 components.
Table 2-9 RH2288 V3 components
No. Compone
nt
Description
1 Rear hard
disk
module
Supported configurations:
l Two 2.5-inch hard disk slots
l Two 3.5-inch hard disk slots
2 PCIe card
on the
mainboard
Two half-height half-length PCIe 3.0 x8 slots for standard PCIe cards
3 PCIe card
on a riser
card
Supported riser card types:
l Riser card 1 with three PCIe 3.0 x8 slots for the following devices:
– One full-height full-length PCIe 3.0 x16 card (bus width: PCIe
3.0 x8)
– One full-height full-length PCIe 3.0 x8 card
– One full-height half-length PCIe 3.0 x8 card
l Riser card 2 with two PCIe 3.0 x16 slots for the following devices:
– One full-height full-length PCIe 3.0 x16 card
– One full-height full-length PCIe 3.0 x16 card (bus width: PCIe
3.0 x8)
The two types of riser cards can be installed only on the I/O module.
4 I/O module Supported configurations:
l Two standard full-height full-length PCIe 3.0 x8 slots and one
standard full-height half-length PCIe 3.0 x8 slot
l Two standard full-height full-length PCIe 3.0 x16 slots (bus width
of one of them: PCIe 3.0 x8)
l Two 2.5-inch hard disk slots
l Two 3.5-inch hard disk slots
5 Internal
cable guide
Enables neat cabling.
6 Chassis Houses all components.
RH2288 V3 Server
User Guide
2 Overview
Issue 32 (2019-03-28) Copyright © Huawei Technologies Co., Ltd. 27
To Next Page
Loading...
