Figure 3-13 Installing the CMA
2. Insert the nail heads on the left outer rail into the holes in the outer support lever of the
CMA, and pull the CMA out to secure it. See step (2) in Figure 3-13.
3. Insert the nail heads on the left inner rail into the holes in the inner support lever of the
CMA, and pull the CMA out to secure it. See step (3) in Figure 3-13.
Step 5 (Optional) If a CMA is installed, route the external cables connected to the server into the
CMA. See Figure 3-14.
RH2288 V3 Server
User Guide
3 Installing and Removing the Server
Issue 32 (2019-03-28) Copyright © Huawei Technologies Co., Ltd. 76
To Next Page
Loading...
