RMS-SNMP01A SNMP Card
User Manual
4 Managing the UPS on the WebUI
Copyright © Huawei Technologies Co., Ltd.
Figure 4-8 Login page
Step 2 Set the language, user name, password, and verify code. The default user name is admin, and
the preset password is Changeme. Table 4-1 describes UPS users.
Table 4-1 Description of UPS users
Performs all operations on the WebUI, including:
System running information browsing
Parameter configuration
System control (startup, shutdown, battery
management, and CIM control)
System configuration(communication configuration,
user management, site configuration, performance
data, SNMP, and RCCMD)
System maintenance (upgrade, operation record
maintenance, performance data maintenance,
historical alarms maintenance, serviceable data
maintenance, and CIM E-Label)
Only browses system running information, without
permission to perform any system changes.
There is no verification code on the login page by default. After three login failures, a verification
code is required.
If you enter incorrect passwords for five consecutive times, your account is locked for 1 hour.
The UPS2000-G provides battery management functions but the UPS2000-A does not.
Step 3 Click Login. The Monitoring page is displayed, as shown in Figure 4-9.
----End
To Next Page
Loading...
