RMS-SNMP01A SNMP Card
User Manual
4 Managing the UPS on the WebUI
Copyright © Huawei Technologies Co., Ltd.
Figure 4-24 User Mgmt. page
Click Add. The Add User dialog box appears, as shown in Figure 4-25. In the Add User
dialog box, enter a user name, select a group (admin by default), set a password, select a
receiver's email and SMS language (multiple languages are available; this language is used in
the received emails and SMS), enter an email address (receives alarm notifications, and
choose whether to send a test mail for verifying configurations), enter a mobile number (used
to receive alarm notification and SMS query results. A GSM modem is required. You can send
a test message to check whether the GSM modem is available). Click Submit to add the user.
The user name cannot exceed 20 characters and can contain only uppercase and lowercase letters, digits,
and underscores. The password contains 6 to 20 characters and at least two types of uppercase letters,
lowercase letters, digits, and underscores.
Figure 4-25 Add User page
Click Modify. The Modify User dialog box appears, as shown in Figure 4-26. You can
change the password, email and SMS language, email address, and mobile number (including
country code). The initial password is required when you make changes. Click Submit to
submit the changes.
To Next Page
Loading...
