RMS-SNMP01A SNMP Card
User Manual
4 Managing the UPS on the WebUI
Copyright © Huawei Technologies Co., Ltd.
Figure 4-34 Page for setting read and write communities for SNMPv1&SNMPv2c (first time
setting)
Figure 4-35 Page for setting read and write communities for SNMPv1&SNMPv2c (not first time
setting)
The default value of SNMP port is 161, which is subject to change.
If you use Huawei NetEco, set SNMP port to 161.
Click Download UPS-RFC1628-MIB on the page to download the MIB file which allows a
third-party NMS complying with the RFC1628 standard, such as UNMS of Generex, to
manage the UPS remotely.
Click Download HUAWEI-UPS-MIB to download the MIB file which allows a third-party
NMS complying with Huawei standard to manage the UPS remotely.
To Next Page
Loading...
