Figure 5-35 Cable connection
● In EMMA networking, ensure that Dry contact scheduling is disabled for the
inverter. Otherwise, the inverter may not accept power scheduling instructions
from the EMMA.
● If Dry contact scheduling is enabled for the inverter by mistake, choose
Settings > Power adjustment > Dry contact scheduling on the home screen
of the app to disable Dry contact scheduling.
Procedure
Step 1 Connect the signal cable to the signal cable connector.
SUN2000-(5K-12K)-MAP0 Series
User Manual 5 Electrical Connections
Issue 01 (2024-05-13) Copyright © Huawei Digital Power Technologies Co., Ltd. 77
To Next Page
Loading...
