Huawei SUN2000 MAP0 Series - Label Description

Working
Mode
Description
Shutdown ● In standby or operating mode, if the inverter receives a
shutdown command or detects a fault, it enters shutdown
mode.
● In shutdown mode, if the inverter detects that the fault is
rectied or receives a startup command, it enters standby mode.
● In shutdown mode, if the black start button of the battery is
pressed, the inverter enters operating mode.
2.5 Label Description
Enclosure Labels
Label Symbol Name Meaning
Delayed
discharge
Residual voltage
exists after the
inverter is powered
o. It takes 5
minutes for the
inverter to discharge
to the safe voltage
level before
maintenance.
Operation
warning
Do not remove the
DC input connector
or AC output
connector when the
inverter is running.
Burn
warning
Do not touch the
inverter when it is
running because its
enclosure is hot.
Refer to
documentati
on
Reminds operators to
refer to the
documents delivered
with the inverter.
SUN2000-(5K-12K)-MAP0 Series
User Manual 2 Overview
Issue 01 (2024-05-13) Copyright © Huawei Digital Power Technologies Co., Ltd. 23