Huawei SUN2000 MB0 Series User Manual

3 Storage Requirements
The following requirements should be met if the SUN2000 is not put into use
directly:
● Do not unpack the SUN2000.
● Keep the storage temperature at –40°C to +70°C and the humidity at 5%–
95% RH.
● Store the SUN2000 in a clean and dry place and protect it from dust and
water vapor corrosion.
● A maximum of six SUN2000s can be stacked. To avoid personal injury or
device damage, stack SUN2000s with caution to prevent them from falling
over.
● During the storage period, check the SUN2000 periodically (recommended:
every three months). If any rodent bites are found on the packing materials,
replace the packing materials immediately.
● If the SUN2000 has been stored for more than two years, it must be checked
and tested by professionals before being put into use.
SUN2000-(12K-25K)-MB0 Series
User Manual 3 Storage Requirements
Issue 01 (2023-04-30) Copyright © Huawei Digital Power Technologies Co., Ltd. 23

Huawei SUN2000 MB0 Series Specifications

General

Type	String Inverter
Max Input Voltage	1100 V
MPPT Voltage Range	200 V - 1000 V
Number of MPPTs	2
Max Input Current per MPPT	26 A
Rated Output Frequency	50 Hz / 60 Hz
Max Efficiency	98.6%
Operating Temperature Range	-25°C to +60°C
Protection Degree	IP65
Cooling	Natural Convection
Power Factor Adjustment Range	0.8 leading to 0.8 lagging
Cooling Method	Natural Convection
Protection Level	IP65
Model	SUN2000
Rated Output Voltage	230 V / 400 V
Humidity	0% - 100%
Communication	RS485