Huawei SUN2000 MB0 Series - Setting Functions and Features through Device Commissioning

Figure 6-7 Creating an owner account
6.3 Setting Functions and Features Through Device
Commissioning
NO TICE
● The grid-connection voltage and frequency of inverters in China are set before
delivery according to NB/T 32004 or the latest Chinese standard. If the inverter
fails to connect to the power grid because the power grid voltage is close to or
higher than the voltage required by Chinese laws and regulations, you can
select other voltage level after obtaining permission from the local power
operator.
● If the power grid voltage exceeds the upper threshold, the service life of loads
on the grid side may be
aected, or energy yield loss may occur. In this case,
the Company will not be liable for any consequences.
Go to the Device commissioning screen and set inverter parameters. For details
about entering the Device commissioning screen, see B Connecting to the
Inverter.
To set more parameters, tap Settings. For details about the parameter settings,
see FusionSolar App User Manual. You can also scan the QR code to obtain the
document.
SUN2000-(12K-25K)-MB0 Series
User Manual 6 Power-On and Commissioning
Issue 01 (2023-04-30) Copyright © Huawei Digital Power Technologies Co., Ltd. 76