Huawei SUN2000 MB0 Series User Manual

4 Installation
4.1 Installation Scenarios
The inverter can be wall-mounted or support-mounted.
Table 4-1 Installation modes
Installation
Mode
Screw Specications Description
Wall
mounting
M6x60 stainless steel expansion bolt Delivered with
the product
Support
mounting
M6 stainless steel bolt assembly Prepared by the
customer
4.2 Determining the Installation Position
4.2.1 Site Selection Requirements
Basic Requirements
● The inverter is protected to IP66 and can be installed indoors or outdoors.
● Do not install the inverter in an easily accessible place because its enclosure
and heat sinks generate high temperature during operation.
● Do not install the inverter in noise-sensitive areas.
● Do not install the inverter in areas with
ammable or explosive materials.
● Do not install the inverter in a place within children's reach.
● Do not install the inverter outdoors in salt areas because it will be corroded
there and may cause re. A salt area refers to a region within 500 m of the
coast or prone to sea breeze. Regions prone to sea breeze vary with weather
SUN2000-(12K-25K)-MB0 Series
User Manual 4 Installation
Issue 01 (2023-04-30) Copyright © Huawei Digital Power Technologies Co., Ltd. 24

Huawei SUN2000 MB0 Series Specifications

General

Type	String Inverter
Max Input Voltage	1100 V
MPPT Voltage Range	200 V - 1000 V
Number of MPPTs	2
Max Input Current per MPPT	26 A
Rated Output Frequency	50 Hz / 60 Hz
Max Efficiency	98.6%
Operating Temperature Range	-25°C to +60°C
Protection Degree	IP65
Cooling	Natural Convection
Power Factor Adjustment Range	0.8 leading to 0.8 lagging
Cooling Method	Natural Convection
Protection Level	IP65
Model	SUN2000
Rated Output Voltage	230 V / 400 V
Humidity	0% - 100%
Communication	RS485