Huawei SUN2000 MB0 Series - Viewing the Plant Creation Status

Figure 6-11 Alarm management
● Method 2: FusionSolar Smart PV Management System
Log in to the FusionSolar Smart PV Management System using a non-owner
account, choose Maintenance > Alarm Management, select the DC arc fault
alarm, and click Clear to clear the alarm.
Figure 6-12 Clearing alarms
Switch to the owner account with PV plant management rights. On the home
page, click the PV plant name to go to the PV plant page, and click OK as
prompted to clear the alarm.
6.4 Viewing the Plant Creation Status
The FusionSolar app provides an overview of plants. You can view the plant
running status, energy yield and consumption, revenue, and energy
ow diagram
in real time.
Log in to the app, tap Home, and tap Plants. This screen displays the real-time
running status and basic information of all plants managed by the user by default.
SUN2000-(12K-25K)-MB0 Series
User Manual 6 Power-On and Commissioning
Issue 01 (2023-04-30) Copyright © Huawei Digital Power Technologies Co., Ltd. 84