Figure 5-12 Assembling DC connectors
----End
Removing a DC Connector
Before removing the positive and negative connectors, ensure that the DC SWITCH
is set to OFF and that the current is less than 0.5 A.
To remove the positive and negative connectors from the inverter, insert an open-
end wrench into the notch and press the wrench with an appropriate force.
Figure 5-13 Removing a DC connector
SUN2000-(12K-25K)-MB0 Series
User Manual 5 Electrical Connections
Issue 01 (2023-04-30) Copyright © Huawei Digital Power Technologies Co., Ltd. 48
To Next Page
Loading...
