Huawei UPS2000-G Series - Page 92

Figure 4-39 Float Charge screen
Table 4-29 Float Charge screen
Item Description Default Value Value Range
Voltage Set the battery oat
voltage. The parameter is
congurable in any mode.
2.25 V/cell 2.25–2.30 V/
cell
Temp.
comp.
coef.
Set a oat voltage
correction coecient based
on the battery temperature
when a battery temperature
sensor is connected. The
parameter is
congurable in
any mode.
3.3 mV/(°C x
cell)
0.0–6.0
mV/(°C x cell)
● Discharge screen
Figure 4-40 Discharge screen (UPS2000-G-15KRTL-01/UPS2000-
G-20KRTL-01)
UPS2000-G-(6 kVA-20 kVA)
User Manual 4 Control Panel
Issue 21 (2022-10-13) Copyright © Huawei Technologies Co., Ltd. 84