UPS5000-A-30 kVA & 40 kVA & 80 kVA
User Manual
Copyright © Huawei Technologies Co., Ltd.
Figure 5-23 Clearing the alarm
WebUI
On the WebUI, choose Monitoring > Control and click Clear Fault to clear the EPO
alarm, as shown in Figure 5-24.
Figure 5-24 Clearing the alarm on the WebUI
Step 3 Check that the EPO alarm has disappeared from the alarm list. If the bypass is normal, the
UPS transfers to bypass mode.
Step 4 Start the inverter.
----End
To Next Page
Loading...
