Huawei USG6000 - Page 125

Command Description Impact
ad-server source { loopback
interface-number | ip-
address ip-address | vlanif
interface-number }
The command configures
the source IP address that a
device uses when sending
packets to the AD server.
None
undo ad-server source The command restores the
default configuration.
None
debugging hardware fast-
forwarding filter acl acl-
number [ number packet-
number ]
The command enables the
function of filtering
hardware fast forwarding
debugging information.
None
undo debugging hardware
fast-forwarding filter
The command disables the
function of filtering
hardware fast forwarding
debugging information.
None
failover commit The command submits SPU
backup configurations.
None
display firewall scale
statistic session
The command displays
statistics on migrated
session entries after SPU
scaling or the SPU backup
status changes.
None
firewall scale finish The command terminates
scaling tasks.
None
display cluster channel
status verbose [ backup |
forward | negotiation ]
[ node-id ]
The command displays
detailed information about
the cluster channel status.
None
undo cluster session-sync
filter enable
The command disables the
cluster session
synchronization filtering
function.
None
cluster session-sync filter id
id { exclude | include }
{ protocol { protocol-type
[ port port-number ] |
protocol-number } | existed-
time existed-time } *
The command sets filtering
conditions for cluster
session synchronization.
None
undo cluster session-sync
filter id id
The command deletes
filtering conditions for
cluster session
synchronization.
None
HUAWEI USG6000&USG9500
Upgrade Guide
2 USG9500
Issue 01 (2018-01-16) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
116