Huawei USG6000 - 2.2 Upgrading Version Software in Single-System

Command Description Impact
undo banner enable The command disables the
display of the system
banner.
None
undo web-manager security
verify-ssl-peer
The command disables
bidirectional certificate
authentication between the
FW and client.
None
undo web-manager security
ca-certificate ca-certificate-
name
The command deletes the
CA certificate specified for
the FW to authenticate the
client certificate.
None
web-manager security ca-
certificate ca-certificate-
name
The command specifies the
CA certificate used by the
FW to authenticate the
client certificate.
None
undo gawa-log non-
certificate
The command configures
that server certificate
validation is required during
the upload of log files to the
FTPS server.
None
file-upload name name ftps
ip-address [ port port ] user
user-name password
password [ directory
directory | certificate
certificate-name ] *
The command enables the
function of uploading files
to an FTP or FTPS server.
None
hwtacacs-server accounting
ip-address [ port ] [ vpn-
instance vpn-instance-
name ] [ secondary | third ]
The command configures an
HWTACACS accounting
server.
None
ldap-server source
{ loopback interface-
number | ip-address ip-
address | vlanif interface-
number }
The command configures
the source IP address that a
device uses when sending
packets to the LDAP server.
None
undo ldap-server source The command restores the
default configuration. By
default, when a device sends
packets to the LDAP server,
the IP address of the actual
outbound interface is used
as the source IP address.
None
HUAWEI USG6000&USG9500
Upgrade Guide
2 USG9500
Issue 01 (2018-01-16) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
115