Huawei USG6000 - Page 123

Command Description Impact
bfd all-interfaces { min-
transmit-interval min-
transmit-value | min-
receive-interval min-
receive-value | detect-
multiplier detect-multiplier-
value } *
The command enables BFD
for OSPFv3 or configures
bidirectional forwarding
detection (BFD) specific
parameters for OSPFv3.
None
ospfv3 bfd block [ instance
instance-id ]
The command blocks the
bidirectional forwarding
detection (BFD)
dynamically created by an
interface.
None
ospfv3 bfd { min-transmit-
interval min-transmit-value |
min-receive-interval min-
receive-value | detect-
multiplier detect-multiplier-
value } * [ instance
instance-id ]
The command configures
OSPFv3 BFD on a specific
interface or configures BFD
session parameters.
None
undo bfd all-interfaces
enable
The command enables BFD
for OSPF in an OSPF
progress and sets BFD
session parameters.
None
undo bfd all-interfaces
{ min-transmit-interval
[ min-transmit-value ] | min-
receive-interval [ min-
receive-value ] | detect-
multiplier [ detect-
multiplier-value ] } *
The command disables BFD
for OSPFv3 or unconfigures
BFD specific parameters for
OSPFv3. By default, BFD is
not enabled or configured at
OSPFv3 process level.
None
ospfv3 bfd { min-transmit-
interval min-transmit-value |
min-receive-interval min-
receive-value | detect-
multiplier detect-multiplier-
value } * [ instance
instance-id ]
The command enables the
bidirectional forwarding
detection (BFD) on the
specified interface enabled
with OSPFv3, or sets the
parameter values of a BFD
session.
None
display dns-filter safe-
search cache [ slot slot-id
cpu cpu-id ]
The command displays the
cache information about the
secure search function of
DNS filtering.
None
reset dns-filter safe-search
cache { all | type { bing |
google | youtube } }
The command clears the
cache information about the
secure search function of
DNS filtering.
None
HUAWEI USG6000&USG9500
Upgrade Guide
2 USG9500
Issue 01 (2018-01-16) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
114