Huawei USG6000 - Page 18

The command Description Impact
[ undo ] mac-authen
username { fixed username
[ password cipher
password ] | macaddress
[ format { with-hyphen
[ normal ] [ colon ] |
without-hyphen }
[ uppercase ] [ password
cipher password ] ] }
The command configures
the user name for MAC
address authentication.
None
display firewall gtp tunnel
[ count ] [ slot slot-id cpu
cpu-id ]
The command displays GTP
tunnel entry information.
None
display firewall gtp tunnel
{ teid teid | apn apn | rai
rai } [ slot slot-id cpu cpu-
id ]
The command displays GTP
tunnel entry information.
None
[ undo ] firewall gtp state-
check enable
The command enables/
disables the GTP stateful
inspection function.
None
[ undo ] log state-invalid
{ basic | extended }
The The command enables/
disables the GTP packet log
function.
None
firewall gtp state-check
action { bypass | block }
The command configures
the action when the GTP
stateful inspection function
detects an anomaly.
None
firewall gtp tunnel aging-
time time
The command sets the aging
time of a GTP tunnel entry.
None
reset firewall gtp tunnel
{ all }
all The command resets
GTP tunnel entry
information.
None
undo firewall gtp tunnel
aging-time
The command restores the
aging time of a GTP tunnel
entry to the default value,
namely, 24 hours.
None
[ undo ] gawa-log non-
certificate
The command configures
that server certificate
validation is not required
during the upload of log
files to the FTPS server.
None
HUAWEI USG6000&USG9500
Upgrade Guide
1 USG6000
Issue 01 (2018-01-16) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
9