Huawei USG6000 - Page 19

The command Description Impact
log backup master database The command copies the
log database monitoring
table in the hard disk or SD
card to the hda1:/ directory
of the CF card for fault
locating.
None
display dns-filter safe-
search cache [ slot slot-id
cpu cpu-id ]
The command displays the
cache information of the
DNS filtering secure search
function.
None
display rm bfd-session [ all |
[ [ vpn-instance vpn-
instance-name ]
[ destination destination-
address ] [ source source-
address ] [ interface
interface-type interface-
number ] [ protocol { bgp |
isis-l1 | isis-l2 | isis-l1l2 |
ospf | rip | pim } ] ] ]
The command displays the
configurations of BFD
sessions in Route
Management (RM). The
configurations include the
global status of BFD,
number of BFD sessions,
and VPN instance,
destination address, source
address, interface, and
session status of each BFD
session.
None
[ undo ] ipv6 route-static
track bfd-session session-
name STRING<1-15>
admindown invalid
The command restores the
default configuration.
None
ipv6 route-static vpn6-
instance vpn6-instance-
name dest-ipv6-address
prefix-length interface-type
interface-number [ nexthop-
ipv6-address ] [ { preference
preference | tag tag } * ]
[ track bfd-session bfd-name
| track nqa admin-name test-
name ] [ description text ]
The command configures an
IPv6 static route in a VPN
instance.
None
ipv6 route-static dest-ipv6-
address prefix-length
interface-type interface-
number [ nexthop-ipv6-
address ] [ { preference
preference | tag tag } * ]
[ description text ]
The command configures
IPv6 static routes.
None
HUAWEI USG6000&USG9500
Upgrade Guide
1 USG6000
Issue 01 (2018-01-16) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
10