Huawei USG6000 - Page 20

The command Description Impact
ipv6 route-static vpn-
instance vpn-instance-name
dest-ipv6-address prefix-
length interface-type
interface-number [ nexthop-
ipv6-address ] [ preference
preference | tag tag ] *
[ description text ]
The command configures
IPv6 static routes in a VPN
instance.
None
ipv6 route-static vpn6-
instance vpn6-instance-
name dest-ipv6-address
prefix-length nexthop-ipv6-
address [ public ]
[ { preference preference |
tag tag } * ] [ track bfd-
session bfd-name | track nqa
admin-name test-name |
inherit-cost ] [ description
text ]
The command configures an
IPv6 static route in a VPN
instance.
None
undo ipv6 route-static vpn6-
instance vpn6-instance-
name dest-ipv6-address
prefix-length [ interface-type
interface-number ]
[ nexthop-ipv6-address ]
[ { preference preference |
tag tag } * ] [ track bfd-
session ]
The command deletes a
unicast IPv6 static route
from a VPN instance.
None
undo ipv6 route-static track
bfd-session [ session-name
bfd-name ] admindown
invalid
The command restores the
default configuration.
None
display bgp ipv6 bfd session
{ [ vpnv6 vpn-instance vpn-
instance-name ] peer ipv6-
address | all }
The command displays
information about the BFD
session set up by BGP.
None
display bgp ipv6 bfd session
all [ vpnv6 vpn-instance
vpn-instance-name ]
The command displays
information about the BFD
session set up by BGP.
None
undo peer { ipv4-address |
ipv6-address } bfd block
The command restores a
peer to inherit the BFD
function from its peer group.
By default, the peer inherits
the BFD function from its
peer group.
None
HUAWEI USG6000&USG9500
Upgrade Guide
1 USG6000
Issue 01 (2018-01-16) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
11