You must save the configuration file before each upgrade in case some configurations
that are not saved during device running are lost when the device is restarted. By default,
the configuration file is stored on the CF card by default. The default loading path is the
same as the saving path.
Detailed operations are as follows:
<NGFW> save
The current configuration will be written to the
device.
Are you sure to continue?[Y/
N]y
Now saving the current configuration to the
device......................
Info:The current configuration was saved to the device successfully.
<NGFW> dir
Directory of
hda1:/
Idx Attr Size(Byte) Date Time
FileName
0 drw- - Oct 08 2013 09:17:10
nlog_db
1 drw- - Jul 31 2013 11:15:36
umdb
2 -rw- 3247 Dec 13 2013 00:42:34
vrpcfg.zip
3 -rw- 3151 Dec 07 2013 20:52:52
scep_ra.cer
4 -rw- 194531064 Nov 29 2013 10:29:52
V500R001C00SPC300.bin
5 -rw- 302167 Dec 12 2013 21:02:54 diagnostic-
information.txt
1438376 KB total (861872 KB free)
2. Log in to the NGFW from PC2 using FTP.
This document uses the Windows FTP client as an example. In practice, you are advised
to use a proven third-party FTP client (such as Cute FTP) to transfer files.
The following information is displayed:
C:\> ftp 192.168.0.1
Connected to 192.168.0.1.
220 FTP service ready.
User (192.168.0.1:(none)): ftpuser
331 Password required for ftpuser.
Password:
230 User logged in.
ftp>
3. Set the file transfer mode. Set the directory for saving the backup files on PC2 to D:
\FTP\Backup. The folder must already exist. You can specify another directory as
required.
ftp> binary /Run the binary command to specify file transmission in binary
mode.
ftp> lcd "d:\FTP\Backup" /Set the directory that stores the backup files on
PC2.
NOTE
The binary mode is required for file integrity, especially in the Linux or Unix system.
4. Run the get remote-filename[ local-filename] command to download the file and save it
to local directory D:\FTP\Backup
For example, before the upgrade, download the existing version software (for example,
V500R001C00SPC300.bin), vrpcfg.zip, Dynamic Feature Component
HUAWEI USG6000&USG9500
Upgrade Guide
1 USG6000
Issue 01 (2018-01-16) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
62
To Next Page
Loading...
