Huawei USG6000 - Page 96

Enter your choice(0-6):
3
Net
paramter:
Protocol type : 1
Unit number : 0
Server IP address : 3.3.3.3
Board IP address : 3.3.3.104
Board IP mask : 255.255.255.0
FTP user name : 1234
FTP user password : ****
Load file
name :vrpcfg_new.cfg
Target file name :
vrpcfg_new.cfg
Download file to :
hda1:
<1> Download
file.
<2> Modify parameters.
<0>
Quit
After the downloading is complete, enter 0 to return to the load and upgrade menu. Then,
enter 0 to return to the BootROM main menu.
Step 7 In the BootROM main menu, enter 2 to specify the system software and configuration file.
====================< Extend Main Menu >====================
| <1> Boot System
|
| <2> Set Startup Application Software and Configuration |
| <3> File Management Menu...
|
| <4> Load and Upgrade Menu...
|
| <5> Modify Bootrom Password
|
| <6> Reset Factory Configuration
|
| <0> Reboot
|
|
---------------------------------------------------------|
| Press Ctrl+T to Enter Manufacture Test Menu...
HUAWEI USG6000&USG9500
Upgrade Guide
1 USG6000
Issue 01 (2018-01-16) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
87