Huawei USG6000E Series - Page 155

Name Description
Fixed interface area Provides service ports, USB ports, console ports, and
out-of-band management ports for device
conguration and maintenance.
Protective ground
terminal
Connects the M4 OT terminal of a PGND cable to the
cabinet or the ground bar in the equipment room.
MAC label Uniquely identies the MAC address of the device,
which is required during network forwarding
conguration.
SN label Uniquely identies the device, which needs to be
provided for the local technical support personnel to
apply for a license.
Fan module Dissipates heat for the device and is swappable. The
fan module can be removed for no more than 1
minute.
Power module Provides power input and distribution for the device.
One power module is included in the standard
conguration. Two power modules can be congured
to achieve 1+1 power redundancy. When one power
module is running properly, the other one is hot
swappable.
Indicators and Buttons
Figure 4-61 Indicators and buttons on the USG6580E
1. PWR, SYS,
USB, HA, WAN
and CLOUD
indicators
2. GE electrical
port ACT
indicator
3. GE electrical
port LINK
indicator
4. Optical port
ACT indicator
5. Optical port
LINK indicator
6. MGMT port
indicator
7. RST button - - -
HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview
Issue 08 (2022-04-20) Copyright © Huawei Technologies Co., Ltd. 148