Figure 5-23 Mounting the USG in a cabinet
----End
Follow-up Procedure
Perform the following checks after the installation:
● Ensure that the USG is placed securely inside the cabinet.
● Ensure that the exhaust of the USG is not blocked by other objects.
5.4.1.2 Mounting a Device on a Workbench
If you do not have a cabinet, you can mount the USG6515E, USG6525E,
USG6550E, USG6555E, USG6560E, USG6565E, USG6575E-B, USG6580E,
USG6585E, USG6605E-B on a workbench.
Precautions
Before unpacking the carton, ensure that the packing carton is intact and not
damaged or soaked. Stop unpacking if the USG is rusted or soggy. Then,
investigate causes and contact the supplier.
The workbench must be:
HUAWEI USG6000E Series
Hardware Guide 5 Hardware Installation
Issue 08 (2022-04-20) Copyright © Huawei Technologies Co., Ltd. 542
To Next Page
Loading...
