Functions and Features
Table 4-251 Functions and features of the SSD-Sata240G-A
Functions and Features Description
Basic functions Storage log.
Hot swap Hot swap is supported, but hard disks
cannot be directly swapped or
removed. Run the disk oine
command. Remove the hard disk
about 30 seconds after the system
displays a message indicating that the
hard disk stops working. Alternatively,
press and hold the OFL button for
about 4 seconds until the OFL
indicator is on, and then remove the
hard disk unit. Otherwise, the hard
disk may be damaged, data may be
lost, and the system may crash.
Restrictions and limitations Do not low-level format the hard disk.
Otherwise, the hard disk cannot be
used.
 
Technical Specications
Table 4-252 Technical specications of the SSD-Sata240G-A
Item
Specication
Form factor 2.5 inch
Dimensions without packaging (H x W
x D) [mm(in.)]
15 mm x 75 mm x 130 mm (0.59 in. x
2.95 in. x 5.12 in.)
Weight without packaging [kg(lb)] 0.135 kg(lb)
Storage capacity [GB] 240
Port type SATA
Maximum power consumption [W] 4.36 W
Maximum heat dissipation [BTU/hour] 14.86 BTU/hour
 
4.4.1.5 SSD-SATA960G-B (SSD 960GB,SATA 6Gb/s,Read Intensive,2.5inch)
HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview
Issue 08 (2022-04-20) Copyright © Huawei Technologies Co., Ltd. 428