Huawei USG6000E Series - 4.5 Optical;Electrical Modules; 4.5.1 Before You Start

Item Specication
Port type SATA
Maximum power consumption [W] 5.23 W
Maximum heat dissipation [BTU/hour] 17.85 BTU/hour
4.5 Optical/Electrical Modules
This chapter describes hardware information for optical/electrical modules of the
USG6000E.
4.5.1 Before You Start
Before using the optical module, please understand the risk of using the non-
certied optical module and how to How to Identify Huawei-Certied optical
modules.
NO TICE
● A USG must use optical modules that have been certied for use. Non-certied
optical modules cannot ensure transmission reliability and may aect service
stability. Huawei is not liable for any problem caused by the use of non-
certied
optical modules and will not x such problems.
● The methods provided here are only for reference. To
conrm whether optical
modules you are using have been
certied for use on Huawei USGs, contact
Huawei technical support.
Risks of Using Non-Huawei-Certied Optical Modules
During certication of optical modules for USG, Huawei completes comprehensive
functionality
verication to ensure quality of optical modules. The veried items
include optical module plug/unplug, transmit optical power, receive optical power,
signal transmission quality, data reading, error tolerance, compatibility,
electromagnetic compatibility (EMC), and environmental parameters.
Non-Huawei-certied optical modules may cause the following problems:
● Non-standard structure and size cause failures to install optical modules on
adjacent optical interfaces.
Structures or sizes of some
non-Huawei-certied optical modules do not
comply with the Multi-Source Agreement (MSA). When such an optical
module is installed on an optical interface, the size of this optical module
hinders optical module installation on adjacent optical interfaces.
● Data bus defects cause suspension of a USG's data bus.
Some non-Huawei-certied optical modules have defects in data bus designs.
Using such an optical module on a USG causes suspension of the connected
data bus on the USG. As a result, data on the suspended bus cannot be read.
HUAWEI USG6000E Series
Hardware Guide 4 Hardware Overview
Issue 08 (2022-04-20) Copyright © Huawei Technologies Co., Ltd. 433