Figure 5-18 Connecting a power adapter to the (USG6510E-POE)
----End
Follow-up Procedure
Verify the following after the connection is complete:
● The power cable is rmly connected to the power supply socket.
● If multiple USGs are deployed, the power cables of each USG are correctly
labeled for distinction.
5.3.8 Powering On or O the USG6510E, USG6510E-POE,
USG6530E
This section describes how to power on or o the USG6510E, USG6510E-POE,
USG6530E. To ensure the normal start and security of the USG6510E, USG6510E-
POE, USG6530E, strictly follow the operation guide to power on or
o the
USG6510E, USG6510E-POE, USG6530E.
Context
Before you power on the USG, ensure that:
● The power cable and PGND cable are properly connected.
● The power switch in the equipment room is easy to locate so that you can
power
o devices in the case of accidents.
HUAWEI USG6000E Series
Hardware Guide 5 Hardware Installation
Issue 08 (2022-04-20) Copyright © Huawei Technologies Co., Ltd. 532
To Next Page
Loading...
