Huawei USG6000E Series - 4.5.7.11 QSFP28-100 G-PSM4; 4.6 Cables

To Next Page

To Previous Page

Item Value

Rx sensitivity (AVG) [dBm] -5.9 dBm

Overload power (AVG) [dBm] 4 dBm

4.5.7.11 QSFP28-100G-PSM4

Table 4-301 QSFP28-100G-PSM4 specications

Item Value

Basic Information

Module name QSFP28-100G-PSM4

Part Number 02311MNM

Model QSFP28-100G-PSM4

Form factor QSFP28

Application standard 100GBASE-PSM4

Connector type MPO

Optical ber type SMF

Working case temperature [°C(°F)] 0°C to 70°C

Transmission rate [bit/s] 100Gbit/s

Target transmission distance [km] 0.5 km

Transmitter Optical Characteristics

Center wavelength [nm] 1310 nm

Maximum Tx optical power [dBm] 2 dBm

Minimum Tx optical power [dBm] -9.4 dBm

Minimum extinction ratio [dB] 3.5 dB

Receiver Optical Characteristics

Rx sensitivity (AVG) [dBm] -11.35 dBm

Overload power (AVG) [dBm] 2.2 dBm

4.6 Cables

This section describes the PGND cable, power cable, conguration cable, Ethernet

cable, and optical ber of the USG.

HUAWEI USG6000E Series

Hardware Guide 4 Hardware Overview

Other manuals for Huawei USG6000E Series