Huawei USG6000E Series - A Appendix; A.1 Requirements for Installation Environment; A.1.1 Device Position

To Next Page

To Previous Page

A Appendix

This section describes the requirements for the USG installation environment and

Fault Tag template.

A.1 Requirements for Installation Environment

This section describes the requirements for the USG installation environment, such

as the device position, humidity and temperature, cleanness, antistatic measures,

lightning protection measures, power supply, and anti-magnetic measures.

A.1.1 Device Position

This section describes the USG position requirements to ensure its security.

Table A-1 lists the requirements for the device position.

Table A-1 Device position requirements

Item

Requirement

Ventilation and

heat dissipation

● To ensure good heat dissipation, keep the air vent of the

device at least 150 mm away from other devices.

● Ensure that the ventilation and heat dissipation system

is available at the position where the device is to be

installed.

Stability The cabinet or mounting table must be rm enough to

support the weight of the device and its accessories.

Grounding Ensure that the chassis or mounting table is properly

grounded.

HUAWEI USG6000E Series

Hardware Guide A Appendix

Other manuals for Huawei USG6000E Series