Huawei USG6000E Series - 5.4.1 Mounting a Device to a Specified Location; 5.4.1.1 Mounting a Device in a Cabinet

5.4.1 Mounting a Device to a Specied Location
The USG6515E, USG6525E, USG6550E, USG6555E, USG6560E, USG6565E,
USG6575E-B, USG6580E, USG6585E, USG6605E-B, USG6610E, USG6615E,
USG6620E, USG6625E, USG6630E, USG6635E, USG6650E, USG6655E can be
mounted in a 19-inch standard cabinet. When no cabinet is available, you can
mount the USG6515E, USG6525E, USG6550E, USG6555E, USG6560E, USG6565E,
USG6575E-B, USG6580E, USG6585E, USG6605E-B, USG6610E, USG6615E,
USG6620E, USG6625E, USG6630E, USG6635E, USG6650E, USG6655E on a
workbench.
5.4.1.1 Mounting a Device in a Cabinet
Install the USG6515E, USG6525E, USG6550E, USG6555E, USG6560E, USG6565E,
USG6575E-B, USG6580E, USG6585E, USG6605E-B, USG6610E, USG6615E,
USG6620E, USG6625E, USG6630E, USG6635E, USG6650E, USG6655E to the
cabinet through the expandable rear mounting ears or adjustable guide rails.
Precautions
Before installing the USG, check the following items:
● Before unpacking the carton, ensure that the packing carton is intact and not
damaged or soaked. Stop unpacking if the USG is rusted or soggy. Then,
investigate causes and contact the supplier.
● The cabinet is stable.
● Before installing the expandable rear mounting ears or adjustable guide rails
on the USG6515E, USG6525E, USG6550E, USG6555E, USG6560E, USG6565E,
USG6575E-B, USG6580E, USG6585E, USG6605E-B, USG6610E, USG6615E,
USG6620E, USG6625E, USG6630E, USG6635E, USG6650E, USG6655E, adjust
the distance between the front and rear angle gauges (rack mounting rails/
vertical columns) to satisfy the installation requirements. The
specic scope of
application is as follows:
HUAWEI USG6000E Series
Hardware Guide 5 Hardware Installation
Issue 08 (2022-04-20) Copyright © Huawei Technologies Co., Ltd. 534